Volume No. :   6

Issue No. :  4

Year :  2015

ISSN Print :  0976-2973

ISSN Online :  2321-581X


Registration

Allready Registrered
Click to Login

Design of Drive System for Head-On-Generation through Slip-Power Recovery in Passenger Electric Locomotives



Address:   C. Nagamani*, R. Somanatham**
*Research Scholar, University College of Engineering, Osmania University, Hyderabad, India.
**HOD, Dept. Of Electrical & Electronics Engineering, Anurag College of Engineering, Hyderabad, India
*Corresponding Author
DOI No: 10.5958/2321-581X.2015.00062.8

ABSTRACT:
Train Lighting and Air-Conditioning is an important aspect of Passenger Coaches and for Trains like the Shatabdi/Rajdhani/Durunto/Double-Deckers/Garib-Rath which run on the Indian Railways, the Power for the Lighting and Air-Conditioning Systems is generated from the Diesel Generator Cars attached on either ends of the Train. This is called End-On-Generation. The use of End-on-Generation which causes lot of noise and air pollution can be eliminated if the Power supply is derived from the Locomotive itself. The authors of this Research Paper intend to propose a Drive System for Traction in which Squirrel Cage Induction Motors will be replaced with Wound Rotor Induction Motor as Traction Motors with a low-Voltage Slip-Power on the Rotor side to Drive the Lighting and Air-Conditioning Loads of the Trailing Passenger Coaches which will be called Head-On-Generation.
KEYWORDS:
Air-conditioning System, Efficiency, Electric Traction, End-on-Generation, Head-on-Generation, Slip Power Recovery, Squirrel Cage Induction Motor, Wound Rotor Induction Motor.
Cite:
C. Nagamani, R. Somanatham. Design of Drive System for Head-On-Generation through Slip-Power Recovery in Passenger Electric Locomotives. Research J. Engineering and Tech. 6(4): Oct. - Dec., 2015 page 399-407.
[View HTML]      [View PDF]



Visitor's No. :   168437