Author(s): Piyush M. Kale, S. T. Bagde

Email(s): Email ID Not Available

DOI: Not Available

Address: Piyush M. Kale*, Prof. S. T. Bagde
Department of Mechanical Engineering, Yeshwantrao Chavan College of Engineering, Hingna Road, Nagpur
*Corresponding Author

Published In:   Volume - 5,      Issue - 2,     Year - 2014


ABSTRACT:
The construction technique in all industrial countries of the world are characterised by a wide range of mechanisation. Construction is labor-intensive and is conducted in dangerous and inaccessible areas. Plastering is widely used as a finishing technology for both interior and exterior walls made from bricks, concrete or timber. Plastering of exterior walls provides heat insulation, sound absorption and protection against air pollution and weather. The application of plaster to interior walls improves the indoor climate by humidity regulation and serves the purpose of compensating inevitable tolerances of the brickwork, thus providing a clean, level surface for further finishing tasks. Special plaster material can also protect against fire or radiation. Although plastering is one of the most physically strenuous jobs in building construction it was not before the early fifties that machines were developed which supported this strenuous task. The first machines to be developed were automated mixers which made the task of manual plaster mixing obsolete Robots are widely used to help human workers in construction sites. Introduction of robotics and automation in this area started in the early 90s aiming to optimize equipment operations, improve safety and performance. Therefore the importance of construction robotics and automating the construction works has grown rapidly. The automatic wall plastering machine will help to save labor cost up to 85%, increase productivity by 10-15 times, get professional quality finishing in less time, reduce valuable time and project cost, manufacture automatic wall plastering machine in low cost etc.


Cite this article:
Piyush M. Kale, S. T. Bagde. To Design and Develop Low Cost Automatic Wall Plastering Machine. Research J. Engineering and Tech. 5(2): April- June 2014 page 65-67.

Cite(Electronic):
Piyush M. Kale, S. T. Bagde. To Design and Develop Low Cost Automatic Wall Plastering Machine. Research J. Engineering and Tech. 5(2): April- June 2014 page 65-67.   Available on: https://ijersonline.org/AbstractView.aspx?PID=2014-5-2-4


Recomonded Articles:

Author(s): Suchita Rai, K. L. Wasewar, M. J. Chaddha, J. Mukhopadhyay

DOI:         Access: Open Access Read More

Author(s): Piyush M. Kale, S. T. Bagde

DOI:         Access: Open Access Read More

Author(s): Advait N. Bhange, Nikhil A. Maske, P. Salodkar

DOI:         Access: Open Access Read More

Author(s): Lakshya Soni, Pawan Kumar, Rahul Goyal

DOI: 10.5958/2321-581X.2016.00021.0         Access: Open Access Read More

Author(s): P. K. Palei, G. R. Tripathy, R. R. Shirke, N. B. Varshikar, V. K. Ghodake, V. Jain

DOI: 10.5958/2321-581X.2016.00025.8         Access: Open Access Read More

Author(s): M. Vijaya Sekhar Reddy

DOI:         Access: Open Access Read More

Author(s): Bhalchandra S. Tankkar, Swapnil Wanjari

DOI: 10.5958/2321-581X.2015.00061.6         Access: Open Access Read More

Author(s): Suchita B. Rai, Kailas L. Wasewar, M.J. Chaddha, R.S. Mishra, J. Mukhopadhyay

DOI:         Access: Open Access Read More

Author(s): Manoj Kumar Tiwari , Samir Bajpai, U. K. Dewangan

DOI:         Access: Open Access Read More

Author(s): Raju Basak, Arabinda Das, Amarnath Sanyal

DOI: 10.5958/2321-581X.2015.00066.5         Access: Open Access Read More

Author(s): P Muralidhar, V Srihari

DOI: 10.5958/2321-581X.2015.00055.0         Access: Open Access Read More

Author(s): M. Vijaya Sekhar Reddy, I.V. Ramana Reddy, K. Madan Mohan Reddy, N. Krishna Murthy, P. Ramesh

DOI:         Access: Open Access Read More

Author(s): Vivek Singh Kamal, Santosh Kumar Kharole

DOI: 10.5958/2321-581X.2020.00026.4         Access: Open Access Read More

Author(s): Joginder Singh Dhiman, Deepak Gupta

DOI:         Access: Open Access Read More

Research Journal of Engineering and Technology (RJET) is an international, peer-reviewed, research journal aiming at promoting and publishing original high quality research in all disciplines of engineering sciences and technology....... Read more >>>

RNI: Not Available                     
DOI: 10.5958/2321-581X 


Recent Articles




Tags