Author(s):
N. Naresh, P. Vijaya Bhaskara Reddy
Email(s):
nareshn50@gmail.com
DOI:
Not Available
Address:
N. Naresh1, P. Vijaya Bhaskara Reddy2
1Assistant Professor, Dept. of Mechanical Engineering, N.B.K.R. Institute of Science and Technology, Vidyanagar - 524413, Nellore, A.P., India
2Associate Professor, Dept. of Mechanical Engineering, N.B.K.R. Institute of Science and Technology, Vidyanagar - 524413, Nellore, A.P., India
*Corresponding Author
Published In:
Volume - 5,
Issue - 1,
Year - 2014
ABSTRACT:
This paper presents optimisation of machining parameters for turning EN16 steel using desirability function analysis (DFA). The experiments were conducted using Taguchi’s L27 orthogonal array on CNC turning with tungsten carbide tool. The machining parameters such as, cutting speed, feed rate and depth of cut are optimised by multi-response considerations namely surface roughness and material removal rate. The optimal machining parameters have been determined by the composite desirability value obtained from the desirability function analysis, and significant contribution of parameters can then be determined by analysis of variance (ANOVA). The analysis of the result shows that the optimal combination for good surface roughness and high material removal rate are medium cutting speed, medium feed rate and high depth of cut. Confirmation test is also conducted to validate the test result. Experimental results have shown that machining performance can be improved effectively through this approach.
Cite this article:
N. Naresh, P. Vijaya Bhaskara Reddy. Optimisation of Machining Parameters for Turning EN16 Steel: Desirability Function Analysis and ANOVA. Research J. Engineering and Tech. 5(1): Jan.-Mar. 2014 page 25-32.
Cite(Electronic):
N. Naresh, P. Vijaya Bhaskara Reddy. Optimisation of Machining Parameters for Turning EN16 Steel: Desirability Function Analysis and ANOVA. Research J. Engineering and Tech. 5(1): Jan.-Mar. 2014 page 25-32. Available on: https://ijersonline.org/AbstractView.aspx?PID=2014-5-1-7