Author(s):
T. R. Sanodiya, Piyush Jha
Email(s):
piyushjha22@rediffmail.com
DOI:
10.5958/2321-581X.2017.00053.8 
Address:
T. R. Sanodiya1, Piyush Jha2*
1Department of Physics, Yashoda Bai Patel College, Kurai, Seoni 480880 (M.P), India
2Department of Applied Physics, Raipur Institute of Technology, Raipur 492101 (C.G.), India
*Corresponding Author
Published In:
Volume - 8,
Issue - 4,
Year - 2017
ABSTRACT:
Mechanoluminescent materials are used for detecting stress distribution in solids. The NaAlSiO4:Eu,Dy phosphor was prepared by solid state reaction method. XRD analysis shows that hexagonal nepheline structure with space group P63. The impulsive excitation technique is used for mechanoluminescence (ML) measurement. The ML intensity initially increases with time, attains a peak value and decreases with time. The time corresponding to ML intensity does not change significantly with increasing impact velocity. The peak ML intensity increases linearly with square of impact velocity. This measurements made suitability of NaAlSiO4:Eu,Dy phosphor for developing stress and damage sensors.
Cite this article:
T. R. Sanodiya, Piyush Jha. Mechanoluminescence of NaAlSiO4:Eu, Dy phosphor for developing impact sensor. Research J. Engineering and Tech. 2017; 8(4): 311-314. doi: 10.5958/2321-581X.2017.00053.8
Cite(Electronic):
T. R. Sanodiya, Piyush Jha. Mechanoluminescence of NaAlSiO4:Eu, Dy phosphor for developing impact sensor. Research J. Engineering and Tech. 2017; 8(4): 311-314. doi: 10.5958/2321-581X.2017.00053.8 Available on: https://ijersonline.org/AbstractView.aspx?PID=2017-8-4-3